Product Selector

Q Door Bi-folding Panel Industrial Doors

  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door
  • Q-door

Description

The Q Door Bi-folding Panel Door offers a high level of security and can be combined with toughened insulated double glazed windows.

Common use

Industrial premises, fire stations, emergency service centres

Maximum Width

14000mm

The Door Panel

The door panel is made from a robust steel reinforced stretch-frame holding pressure cast polyurethane foam between outer coverings.

The outer skin can be either a plastic coated or galvanised steel 0.6mm thick skin in a profiled design.

The pressure cast polyurethane foam is completely Freon free making the door the most sturdy and resilient in its class. *(Figure: Of 52Kg density / m3).

The reinforced stretch-frame is 5mm thick steel with anchor profiles to reinforce locks, hinges and mountings for incomparable durability.

Adjustable hinges

Fixings that do move for operation proposes have been designed on the basis of simplicity and heavy dimensioning to guarantee extremely low service cost and a long service life in respect of operating functions, corrosions, energy saving etc.

Two Specifically Developed Hinges That Provide Variations

KGJQ- (Standard hinge) - Normally used together with a steel plate door sill 100x100mm that is fitted to the floor. Each time the door moves the steel door is swept off; providing a flat and clean sealing surface. KGJQ is adjustable vertically.

3D Hinge - Is used on flat floors (or if the floor slopes towards the door). Multi-dimensional adjustment and lifting movement. Roller bearing runs on the track and lifts the door while moving. To adjust the door and seal vertically and sideways.

Electric operation

All electric operated Q doors are automatic locking

Manual operation

Q Door is operated and locked as standard on the inside using cremone bolts. As an extra the cremone bolt can be fitted with a cylinder lock (excl. cyl.)

Sealing System

It is important that the door is equipped with a sealing system that withstands ageing. This is why there are four different corner-sealing joints placed around the door.

The rubber sealing system gives the door the markets best insulation and tightness tested values for insulation

Insulated to European Standards

Q doors F4's sealing system complies with this top European requirement, but at three times the pressure!

*(Figures: The top European class 3 for air leakage describes air leakage (T Value) as at best 1.5m3/m2/h at 50 Pa pressure. I.e. 1.5 m3 / m2 /h to 150 Pa)

Windows

Windows can be placed in variable combinations and sizes in the door panel as an extra.
The standard windows have aluminium frames, with the option of powder coating.
All window frames are constructed with an open thermal bridge and toughened insulated double glazed glass as standard for insulation.

Operating Motor

The motor is simple, reliable and extremely durable. This virtually eliminates any maintenance costs.

There are two versions of motor unit, which operate closing at the rate 8 or 12-seconds. These options will reduce heat loss by matching the correct speed motor with your access speed be it vehicle or pedestrian.

The Door Holder (Manual Doors Only)

When in the open position the door leafs are held back with the door holder for safety.
The door holder engages and locks when the door is opened and is manually disengaged before closing.
Alternatively doors that open inwards can be fitted with a gas spring controlled door holder with a semi-automatic opening mechanism. When the set time limit is reached the door holder deactivates and allows the door to close automatically. No special actions are required to set or close the door.

Electric Doors will self-hold open.

Safety Factor

Sensors are built within the sealing system and will disengage door movement. When an object touches the rubber seal the sensor is activated and disengage movement of the door.

Q Door Options

Customise the Q Door to your specification by adapting

  • Sections
  • Windows
  • Colour
  • Entry door
  • Opening inward opening or outward
  • Window Grille
  • Door Stop
  • Operation: manual or electric

Environmental Specification

For example a door 5000mm x 5000mm with 4 panels

  • Resistance to Wind load, Class (0-5):5
  • Water tightness, Class (0-3) :3
  • Air Permeability, Class(0-6):5
  • Thermal ability (U-Value) complete door:0,9
  • Thermal ability (U-Value) best average of panel:0,23

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services