Product Selector

Armourguard® C1 Roller Shutters

  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1
  • Armourguard C1

Description

The Armourguard C1 is the most versatile of all roller shutters. It’s capable of many design variations to suit site requirements, whilst retaining its high quality security level. This model incorporates solid 76mm curved galvanised steel sections that are available in three thicknesses to suit the size of opening and security level.

Common use

The Armourguard C1 is one of our most diverse roller shutters and it can be widely used in commercial and industrial applications, such as retail units, shop fronts, shopping malls, department stores, supermarkets and industrial premises loading bay doors. It can be used for window and door protection.

Alishield F3

Maximum Width:

10000mm

Dimensions:

Normally 76mm x 0.71mm

Weight:

9.34 kg per square metre

Finish:

Galvanised bright rolled mild steel. Polyester powder coat colours are available.

View Shutter Box Specifications

Construction

0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Overall height (top of box) Commercial Industrial
Up to 2050mm box size 254mm 355 +
Up to 2800mm box size 305mm 355 +
Up to 3500mm box size 355mm 355 +
Please note industrial shutters have different size plates/boxes
On widths exceeding box sizes may move up one size due to deflection.

Finish

Galvanised steel standard. Polyester powder coat colours are available.

View Guide Rail Specifications

Construction

Standard guide rails: 38mm x 32mm x 3mm - 100mm x 32mm x 3mm dependant on width
Electric shutters require a 50mm x 50mm steel box section (both sides) used to allow for motor unit and safety brake. A 76mm x 50mm box section will be used for shutters over 160kg in weight (5000mm x 3200mm approximately).

Finish

Galvanised bright rolled mild steel. Polyester powder coat colours are available.

View Operational Specifications

Spring Loaded

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Single Phase Electric

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.
Draw 240 volts and 0.5 - 2.5 amps dependant upon the shutter size
Provision of a 13 amp fused spur is required for installation

Three Phase Electric

Design of this model will alter for three phase operation.
Electrical requirements are dependant on usage, further details on request

Override

A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.

Hand Chain Operation (Industrial)

A counter balanced helical spring controlled via hand chain and chain lock to secure.

Control

Standard security key switch or rocker switch. Other controls are available on request.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services